BDWJY - ALKYD ENAMEL GLOSS, AIR DRY
- MSDS: BDWJY
- Manufacturer: CHEMRAY COATING CORP
- Product Name: ALKYD ENAMEL GLOSS, AIR DRY
- National Stock Number: 8010-00-298-2298
Product Identification
Product ID:ALKYD ENAMEL GLOSS, AIR DRY
MSDS Date:01/01/1987
FSC:8010
NIIN:00-298-2298
MSDS Number: BDWJY
Responsible Party
KENILWORTH, NJ 07033
US
Emergency Phone: 201-245-1111
Info Phone: 201-245-1111
Cage: 33832
Contractor
Telephone: 201-245-1111
Cage: 33832
Ingredients
ALKYD RESIN
Fraction By Weight: 36%
RULE 66 MINERAL SPIRITS
Fraction By Weight: 44%
ACGIH TLV: 120PPM
LEAD COBALT DRIERS (OSHA PEL FROM 29CFR 1910.1025)
Fraction By Weight: <5%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3(PB); 8990
Hazards
Effects of Overexposure:EXCESSV INHAL MAY CAUSE HDACH, DIZZ,
UNCONSCIOUSNESS/COMA.SKN OR EYE CONTCT:IRRIT,DRYING OF SKIN.
First Aid
First Aid:FUMES:REMOVE FROM EXPOSURE, RESTORE BREATHING.KEEP
WARM.NOTIFY DR. SPLASH(EYES): FLUSH W/RUNNING WATER AT LEAST 15
MIN. TAKE TO DR.REMOVE CONTAM CLOTHING.CONSULT DR.
SPLASH(SKIN):WASH AFFECTED AREA W/ SOAP & WATER.
Fire Fighting
Flash Point:100 F PMCC 38 C
Lower Limits:0.7
Upper Limits:6.0
Extinguishing Media:CO*2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATR FOG USED TO COOL CLOS CONTNRS TO PRVNT
PRESSR BLDUP
Unusual Fire/Explosion Hazard:CLOS CONTANS MAY EXPLOD WHN EXPOS TO
EXTREME HEAT. DO NOT APPLY TO HOT SURFACES.
Accidental Release
Spill Release Procedures:REMOV W/ABSORBENT MATERIAL OR FLUSH WITH WATER
INTO RETAINING AREA OR CONTAINER.AVOID SPARKS,FIRE & HOT SURFACES.
VENTILATE AREA.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS OR OPEN
FLAMES. USE W/
Other Precautions:DO NOT TAKE INTERNALLY.
Exposure Controls
Respiratory Protection:WHN SPRAYING,USE NIOSH & MESA APPRVD RESPIRATOR.
Ventilation:LOC-SUFF TO KP LEL & LOWEST TLV BELOW STATED LIMIT.
MECHANIC
Protective Gloves:YES
Eye Protection:GOGGLES AGNST SPLASH/SPRA
Other Protective Equipment:IMPERMBLE APRON FOR PROLONGED OR REPEATED
CONTACT.
Supplemental Safety and Health
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315-390 F
Spec Gravity:1.09
Evaporation Rate & Reference:N BUAC 0.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GRAY LIQUID NO OBNOXIOUS
Percent Volatiles by Volume:60
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS,STRONG ACIDS OR BASES.
Stability Condition to Avoid:HEAT,SPARKS,OPEN FLAME & FIRE.
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
MONOXIDE AND/OR CARBON DIOXI
Disposal
Waste Disposal Methods:INCINERATE IN APPRVD FACILITY OR DISPOS OF IAW
LOCAL,STATE & FEDERAL REGULATIONS. DO NOT INCINERATE CLOSED
CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.